Centeron Wireless Tank Monitoring System

The Sump Alarm Monitor can be used in a wide variety of applications. It’s perfect for pump dispenser sumps, tank sumps or interstitial space monitoring. The Sump Alarm Monitor works with the Centeron Alarm Console when an on-site alarm is needed or with the Centeron Data Center for remote monitoring.

• Sump depths up to 30 feet
• Easy to adjust set point level
• Suitable for fuels and lubricants
• Reliable float switch technology
• Protective enclosure for float assembly
• Magnetically mounted monitor
• Monitor transmits on a continuous frequency to verify operational status

• Temperature range: -40° C to + 80° C
• Radio range: 1-mile line of sight, 500 ft. obstructed
• 3-year battery life, low battery indication
• ETL/cETL listed: Intrinsically Safe for Class I, Division 1,Group D hazardous locations
• UL 50 Type 3 environmentally sealed enclosure
• Radio complies with FCC Part 15
• 3rd party certified for leak detection

The Centeron System

We start with the monitor. It's wireless, so no special know-how or tools are needed to install it. It's powerful, too. Our DSSS radio technology is far superior to the narrow bandwidth radios found in other wireless systems. That means the alarm signal gets through even in the harshest environment.

The Sump Monitor sends its message to the Centeron Alarm Console to sound a local alarm when the float switch is activated. The message can also be sent to a Centeron Controller for posting on the Centeron Data Center. From there, an e-mail, text message or fax can be sent to alert you wherever you are.

Just think what that means to your business. You can eliminate the fear of costly overfills or undetected leaks. Eliminate manual monitoring of your tanks during every fill. Eliminate the need for manual leak inspections. Let Centeron do it for you 24/7. Centeron puts you in control so you can manage your business better.

ETL/cETL Marked Intrinsically Safe apparatus for use in Class I, Division 1, Group D hazardous locations, conforming to ANSI/UL 913 and CAN/CSA C22.2 No. 157.

FCC Part 15 Registered: NU9TX0669-0110.

This device is manufactured by Robertshaw Controls Company, in Maryville, TN USA under the following US Patents: 4,977,577; 5,067,136; 5,119,396; 5,265,120; 5,408,217; 4,581,606; Patents pending in the US and other countries.