|
Download Printable Spec Sheet (PDF)
|  
Centeron Wireless Tank Monitoring System
The Centeron Switch Monitor can be used with many types of switches. The monitor transmits immediately
whenever a switch event occurs. It has the capacity to handle two independent switches, so it can
be used for low/low, high/high or high/low event monitoring. Use it with the Centeron Alarm Console
to generate an immediate audible and visual alarm, or to control an external relay. The Switch Monitor
also communicates with the standard Centeron Controller so its status is available at any remote
location. It’s perfect for use with position, pressure or temperature switches.
- Completely wireless. No costly electrical wiring is required
- No calibration required
- Monitors one or two switches independently
- Transmits immediately whenever a switch event occurs
- Transmits at a regular interval to validate operation
- Magnetically mounted for easy installation
- Temperature range: -40° C to +80° C
- UL 50, Type 3 environmentally sealed enclosure
- 5-year battery life with 4 hour transmit interval
- Low Battery indication
- Radio range: 1-mile line of sight, 500 feet obstructed
- Radio complies with FCC Part 15
- ETL/cETL listed: Intrinsically safe for use in Class I, Division 1, Group D hazardous locations
when used with a simple switch
|
| 
|
1 The Switch Monitor is provided with a 10-foot wire harness assembly
with the mating electrical connector.
1 Use a sealed switch with gold bifurcated contacts only.
1 For intrinsically safe operation, the switch must be connected to the monitor only,
with no external power applied across the switch terminals.
|
The Centeron System
We start with the monitor. It's wireless, so no special know-how or tools are needed to install
it. It's powerful, too. Our DSSS radio technology is far superior to the narrow bandwidth radios
found in other wireless systems. That means the alarm signal gets through even in the harshest environment.
The Switch Monitor sends its message to the Centeron Alarm Console to sound a local alarm when preset
limits are exceeded. The message can also be sent to a Centeron Controller for posting on the Centeron
Data Center. From there, an e-mail, text message or fax can be sent to alert you wherever you are.
Just think what that means to your business. Your on-site personnel are immediately notified to
take corrective action whenever an out of spec condition occurs, potentially preventing downtime
and lost revenue. And you have remote access to the same information to help manage your business
24/7. Simply put, Centeron puts you in control so you can manage your business better.
|
ETL/cETL Marked Intrinsically Safe apparatus for use in Class I, Division
1, Group D hazardous locations, conforming to ANSI/UL 913 and CAN/CSA C22.2 No. 157.
FCC Part 15 Registered: NU9TX0669-0110.
This device is manufactured by Robertshaw Controls Company, in Maryville, TN USA under the following
US Patents: 4,977,577; 5,067,136; 5,119,396; 5,265,120; 5,408,217; 4,581,606; Patents pending in
the US and other countries. |
|
