|
Alarm Monitors
Centeron Alarm Monitors are the perfect solution for your monitoring needs if immediate notification is needed
when alarm set points are exceeded. They are used with the Centeron Alarm Console to generate an audible or
visual alarm on site or used with the Centeron Data Center for remote monitoring.
 |
Switch Monitor
The Centeron Switch Alarm Monitor can be interfaced with a variety of simple switches. Use it to monitor
position switches, temperature switches or pressure switches. The Monitor transmits immediately whenever
the switch changes state and has the capacity to handle up to two independent switches. |
| |
|
 |
High Level Alarm Monitor
Centeron Alarm Monitors sense fluid level and immediately transmit an alarm signal when a set point level is reached. The Dual Input High Level Alarm Monitor is specifically designed to provide two alarms for added protection against overfills. Use it with the Centeron Alarm Console to generate an immediate audible and visual alarm, or to automatically shut down the dispensing pump. Just reset the console after the first alarm and the monitor will transmit again when the second limit is reached to re-activate the alarm. The monitor also communicates with any standard Centeron Controller so the alarm status can be accessed at any remote location with Internet access. |
| |
|
 |
AC10C Alarm Console
The AC10C Alarm Console wirelessly receives signals from up to 20 Centeron Alarm Monitors to provide a very cost-effective alarming system. Used to detect overfills, leaks, low fluid levels, or out-of-range pressures or temperatures, the AC10C's ease of use and flexibility make it an excellent choice for any alarm application. |
| |
|
 |
Alarm Console
On-site personnel use the Centeron Alarm Console and Centeron Alarm Monitors for applications that
require immediate attention when the monitored parameter exceeds a preset value. The Alarm Console can
be used to activate an audible or visual alarm or switch an external relay when an alarm condition occurs. |
|
